Last visit was: It is currently 29/03/2020, 19:26


All times are UTC + 1 hour [ DST ]




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Unable to activate Output1 in 4.20mA
PostPosted: 20/03/2019, 5:03 

Joined: 20/03/2019, 4:41
Posts: 3
Dear mrs, mr,
I am using a ATR234-20ABC.

This device is connected with a drew point sensor 2 wire 4.20mA
I can see the value on the controller .

But I need to transert this value with the Controller Output C1 in 4.20mA

My configuration is

2 - Sen {4.20}
3 - dP {0.0}
4 - LoLS {-100}
5 - uPLS {20}


1 - cout {c4.20}
67 rEtr {MA P}
68 LoLr {0}
69 UPLr {100}

jumpers are on JP5 an JP7 JP9 0-- (as picture 5.1.j)

The controller is unable to activate the C1 output
Is it a controller s problem ? configuration problem ?
Best regards
renaud


Top
Offline Profile  
 
 Post subject: Re: Unable to activate Output1 in 4.20mA
PostPosted: 20/03/2019, 9:55 
Moderatore

Joined: 12/09/2016, 14:49
Posts: 731
Hi,
this is a configuration parameter issue: the parameter 1.[cout] must be "c.01" value if you want use the retransmission function. Please check it.

Best regards.


You do not have the required permissions to view the files attached to this post.


Top
Offline Profile  
 
 Post subject: Re: Unable to activate Output1 in 4.20mA
PostPosted: 26/03/2019, 9:32 

Joined: 20/03/2019, 4:41
Posts: 3
Dear Mr
I changed the parameter as you said ... But still not working
C1 is still off

Best regards
renaud


Top
Offline Profile  
 
 Post subject: Re: Unable to activate Output1 in 4.20mA
PostPosted: 26/03/2019, 10:18 
Moderatore

Joined: 12/09/2016, 14:49
Posts: 731
Hi,
parameters list and hardware configuration attached.
If it does not work fine using this settings, please contacts your reseller.

Best Regards.


You do not have the required permissions to view the files attached to this post.


Top
Offline Profile  
 
 Post subject: Re: Unable to activate Output1 in 4.20mA
PostPosted: 26/03/2019, 10:48 

Joined: 20/03/2019, 4:41
Posts: 3
Thank you for your help


Top
Offline Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC + 1 hour [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Theme created StylerBB.net & kodeki