Iris _

Pixsys Forum

everybody's effort for the same goal

entrada analógica 4-20mA en PL260

Post Reply
user16097
Posts: 1
Joined: 10/10/2017, 13:28

entrada analógica 4-20mA en PL260

Post by user16097 »

Hello, I would like to know how to configure the analog inputs of 0-20mA in the PL260
Pixsys tecnico 6
Moderatore
Posts: 1198
Joined: 12/09/2016, 14:49

Re: entrada analógica 4-20mA en PL260

Post by Pixsys tecnico 6 »

Hi,
follow this dip-switch settings example to enable the mA AI1 input.
DIP1=ON
DIP2=OFF
DIP3=OFF
DIP4=OFF

Special marker value:
Set the SM40 = 5 (enable 0-20mA signal) and you can define the signal range using the SM46 and SM52.

Best Regards.
Post Reply