Last visit was: It is currently 19/09/2019, 4:57


All times are UTC + 1 hour [ DST ]




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: [DDR245] 0-10v sensor and a digital input at the same time?
PostPosted: 21/03/2016, 13:27 

Joined: 21/03/2016, 13:16
Posts: 3
Hey,

I am trying to achieve a system where my DRR245 mirror's its sensor 0-10v:
If the sensor sees 10v the output on SSR should be 0v.
If the sensor sees 0v the output on SSR should be 10v.
If the sensor sees 6v the output on SSR should be 4v.

Except when on the digital input sees 10v. Then it shoud be:
If the sensor sees 10v the output on SSR should be 4v. <- NOT 0
If the sensor sees 0v the output on SSR should be 10v.

The mirroring without the digital input was doable with following parameters:
C.out : C.01
SEn : 0.10
rETr : vo.P
Lol.r : 10
uPLi.r: 0

What should i do to enable the functions I need so that i can make the digital input part work?


Top
Offline Profile  
 
 Post subject: Re: [DDR245] 0-10v sensor and a digital input at the same ti
PostPosted: 21/03/2016, 13:30 
Moderatore

Joined: 29/10/2010, 10:09
Posts: 1305
Hi,
with digital input you can switch from automatic/manual mode.When you are in manual mode you can select, using the arrows, how much the anologue output must generate.


Top
Offline Profile  
 
 Post subject: Re: [DDR245] 0-10v sensor and a digital input at the same ti
PostPosted: 21/03/2016, 13:51 

Joined: 21/03/2016, 13:16
Posts: 3
Pixsys tecnico 1 wrote:
Hi,
with digital input you can switch from automatic/manual mode.When you are in manual mode you can select, using the arrows, how much the anologue output must generate.


Thanks for your quick reply.

The digital input will switch values a lot of times during the day. Must i update the output percentage or will it remember the setting?

I put 10v on the digital input i go to manual mode, change the percentage so that SSR goes from 4-10. Then i put 0v on the digital input it will automatically change the percentage back to 100 so that SSR goes from 0-10. Then when i put 10v on it again it will have remember the percentage i put it on so that SSR changes to 4-10 again.

Is that correct?


Top
Offline Profile  
 
 Post subject: Re: [DDR245] 0-10v sensor and a digital input at the same ti
PostPosted: 21/03/2016, 15:39 
Moderatore

Joined: 29/10/2010, 10:09
Posts: 1305
When you pass from automatic to manual, the regulatore mantains the last value, so if you have 7V on auto, when you pass to manual you will have 7V and then you can change using arrows.


Top
Offline Profile  
 
 Post subject: DDR245 0 10v sensor and a digital input at the same time
PostPosted: 12/03/2019, 18:23 

Joined: 03/02/2019, 20:08
Posts: 6
Location: Sri Lanka
When I open beta it auto finds my install directory and can load it no problems, except if you try to save in beta and play that save in the other one it will be odd.


Top
Offline Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC + 1 hour [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Theme created StylerBB.net & kodeki