PROGRAMMING EXAMPLES Pixsys Suite (LogicLab and PageLab)

[Pixsys tecnico 3]

Below there are some examples of logic and graphics programming:

Example 1:
Example Modbus RTU and CANopen network configuration and basic graphical objects

Demo_ModbusRTU_CANOpen.zip

Here you will find the video step by step for the project attached above
1-Create LogicLab project
http://www.youtube.com/watch?v=TXZ8WGIcwV8

2-Configure Modbus Network
http://www.youtube.com/watch?v=rj0RSq8OpiA

3-Configure CanOpen Network
http://www.youtube.com/watch?v=NpUSC47SrQA

4-Run PLC and download_code
http://www.youtube.com/watch?v=vw27vRyFIbo

5-Create project PageLab
http://www.youtube.com/watch?v=pLsSXVbNKNw

6-Link PLC Variables
http://www.youtube.com/watch?v=pDVCLr91MRY

7-Create Graphics page
http://www.youtube.com/watch?v=VStisHj1FyY

8-Insert bitmap
http://www.youtube.com/watch?v=b7-ZrLS-RwM

9-Insert button change page
http://www.youtube.com/watch?v=NSUk-0ScZEo

10-Insert label and variable
http://www.youtube.com/watch?v=ktRNLjMyYn8

11-Insert Bar Graph
http://www.youtube.com/watch?v=nJRBxTrvxBA

Example 2:
The example shows how to set the function block (on "ETD884" library) for the reading of
NTC analogue inputs.
It is explained how to use the function block "DATALOGGER" which acquires the four
processes and save a .csv type file on the memory of Panel HMI.
Finally it is showed the procedure to transfer files to USB key and to delete files from
memory.

Demo_DataLogger.zip

Here you will find the video step by step for the project attached above

01-How to configure analogue inputs reading
http://www.youtube.com/watch?v=3JlDy8Wa8qs

02-Converting analogue reading into NTC degrees
http://www.youtube.com/watch?v=hCTA9fNCOk0

03-Configure the "datalogger" function block
http://www.youtube.com/watch?v=nePPCfwtBPU

04-Configure the file copy procedure on USB key
http://www.youtube.com/watch?v=qsa-iFzduUI

05-PLC configuration and download of the code
http://www.youtube.com/watch?v=j_gJFzIuuR8

06-Configure "Trend" object in PageLab
http://www.youtube.com/watch?v=RuGXLh81DYw

07-Create copy files and delete files buttons
http://www.youtube.com/watch?v=2Rjg3AaNQ1E

08-Setting text fields and values visualization
http://www.youtube.com/watch?v=uXXGxP6SNoo

09-Download of the graphic code on HMI panel
http://www.youtube.com/watch?v=ftMJmHE-19s