hello
i want to read out if the heater is working or not. i use an atr401-22abc-t.
heating is on relay output q1 (3,5)
therfore i use relay output q2 (6,8) which is supplied with 4,7V.
to get an output i set
37 [AL.1] to St.Al
38 [A.1.Pr] to Pro1
39 [A.1.S.o.] to n.o. start
but nothing happens...
i thought when the heater is in progress i get a signal, if its not heating no signal...
do you have any idea what i did wrong?
thx
ug
[ATR401] READ IF HEATER IS WORKING
-
- Posts: 3
- Joined: 29/10/2010, 10:32
Re: READ IF HEATER IS WORKING - atr401-22abc-t
Hallo
It is not possible to program an Alarm relay in this way.
If you nead to duplicate the main output, add an external relay/contactor (with 2 contact output) and link your services like necessary.
It is not possible to program an Alarm relay in this way.
If you nead to duplicate the main output, add an external relay/contactor (with 2 contact output) and link your services like necessary.