Re: Are there LabView examples available for the ATR243-21AB
Posted: 27/04/2012, 8:52
Hi,
the LabSoftView software is very simple to use:
-the kit includes software on USB stick, Memory Card with battery and USB cable so you don't need anything else;
-just connect the ATR234 to the PC using the Memory card (with USB), select the type of controller and start to configure it selecting parameters from menus;
-Once you have changed the parameters/set-points you need, just click to "WRITE" button and the controller will be programmed in few seconds!
http://www.pixsys.net/en/products/softw ... ng-kit-236
the LabSoftView software is very simple to use:
-the kit includes software on USB stick, Memory Card with battery and USB cable so you don't need anything else;
-just connect the ATR234 to the PC using the Memory card (with USB), select the type of controller and start to configure it selecting parameters from menus;
-Once you have changed the parameters/set-points you need, just click to "WRITE" button and the controller will be programmed in few seconds!
http://www.pixsys.net/en/products/softw ... ng-kit-236