To be able to program PL700, these steps are required:
- Download Codesys v3.5.16.x IDE from the official Codesys site
- Go to the Pixsys Download area, enter the "Codesys for PL700 PLC" section, download and install the package "CODESYS Control for PL700 3.5.x.x.package". This package contains the PL700 device description which is used in the Codesys devices library.
All Codesys software/libraries can be downloaded form the official Codesys store:
https://store.codesys.com/
If you need only the Codesys development software , the link is: https://store.codesys.com/codesys.html
To connect the Codesys IDE to the PLC PL700, the official guide/video by Codesys can be used, the programming environment is completely standard.
Codesys V3 programming example for PL700 series.
EXAMPLE 1: PLC Codesys interface with PDR100 and PDR200 series inverters
This example show how to use, in the PLC PL700-335-1AD, the ModbusRTU serial to communicate with PDR100 and PDR200 series inverters
Bus: ModbusRTU
Direct link to the topic in which the application is explained in detail:
https://forum.pixsys.net/viewtopic.php?f=31&t=2234
EXAMPLE 2: How to use RS485, CANopen, PLE-DIN-BUS serials
This example show how to use, in the PLC PL700-335-1AD, the ModbusRTU, CANOpen and PLE-DIN-BUS on some MCM260X e PLE500-6AD I/O modules.
In the PLC PL700, the PLE-DIN-BUS is used as a standard CANopen, on the channel "0", while the CANopen available on the terminal blocks is on the channel "1". her you can find the EDS files to be use in Codesys for all Pixsys I/O modules.
Bus: ModbusRTU, CANopen, PLE-DIN-BUS
EXAMPLE 3: How to use EtherCAT protocol with a OMRON ServoDrive serie R88D
This example show how to use the EtherCAT protocol for the management of a OMRON R88D servo with the NX-ECC203 coupler.
It includes web visualization (WEBvisu) with predefined Codesys graphical objects to configure and give commands to the servo.
This example can be used with different servo producers, because the commands are standard. It doesn't need optional licence because it uses the Codesys standard EtherCAT master driver.
Bus: EtherCAT
EXAMPLE 4: How to use EtherCAT protocol with a LSiS ServoDrive serie XGT "XDL"
This example show how to use the EtherCAT protocol for the management of a LSiS XGT servo..
It includes web visualization (WEBvisu) with predefined Codesys graphical objects to configure and give commands to the servo.
This example can be used with different servo producers, because the commands are standard. It doesn't need optional licence because it uses the Codesys standard EtherCAT master driver.
Bus: EtherCAT
EXAMPLE 5: How to use the EtherCAT protocol with a virtual axis
This example show how to use the EtherCAT protocol to manage a VirtualAxis, including also the Webserver visualization with predefined Codesys graphical objects to configure and give commands to the Axis.
Bus: EtherCAT
EXAMPLE 6: How to use the MQTT protocol
This example show how to use the MQTT protocol using an OpenSource library to publish and subscribe data form/to a MQTT server.
Bus: MQTT (Ethernet port)
EXAMPLE 7: How to use the Persistente Manager to manage retain variables
This example show how to use the Codesys "Persistente Manager" service to manage the variables that must be maintained after a power off (retain). It is composed by a simple project and a PDF with a step by step guide on how to import the MQTT FunctionBlock in an existing project.
Bus: none
Important: please set the priority of the task HIGH and LOW to 10 and 30 respectively.
EXAMPLE 8: Creating Historical Graphs in WebVisu
This example describes how to use the 'trend' object for displaying simple (short), historical, and variable-conditioned graphs. The project and its description is provided directly by Codesys Forge and can be found from this link:
Bus: none
EXAMPLE 9: Working with files and folders
This example describes how to work with PLC files and folders. The project and its description is provided directly by Codesys Forge and can be found from this link:
https://forge.codesys.com/prj/codesys-e ... home/Home/
Bus: none
EXAMPLE 10: Creating/editing/reading files
This example describes how to read/write files. The project and its description is provided directly by Codesys Forge and can be found from this link:
https://forge.codesys.com/prj/codesys-e ... home/Home/
Bus: none
EXAMPLE 11: "loop control" package
This package contains a number of function blocks and libraries for process control. The package and its description is provided directly by Codesys.
Bus: none
EXAMPLE 12: OSCAT package: 'Open Source Community for Automation Technology' (http://www.oscat.de/)
This package contains a number of function blocks and libraries developed by OSCAT and ported to Codesys. The packages and their description are provided directly from the Codesys store and can be found from this link:
https://store.codesys.com/en/catalogsea ... t/?q=oscat
Bus: none
EXAMPLE 13: Interfacing Codesys PLC with Movicon scada
This example describes how to make a PanelPC or HMI equipped with the Movicon 11.6 scada communicate with a Codesys V3 PLC such as the PL700.
Codesys-side configuration:
- in the project in use, add the "Symbols Configurator" object and open it
- select from the existing variable groups which variables you want to make available to the scada
- use the "Build" button to compile the symbol configurator
- compile and download the project to the PLC.
Configuration on the Movicon side
- from the list of available drivers, choose the "3S\CoDeSys" communication driver
- double click on the driver to open the driver configuration: in the "Stations" tab press "Add" to add a PLC and then configure it as you see in the image in the zip, changing only the IP address of the PLC. Before exiting, use the "Test Cable/Comm." button to check that the configuration is correct.
- Right-click on the driver name and select "Import PLC database". Variables can be imported directly from the connected PLC ("import from PLC" button) or from file ("import from file" button), filtering the file extension as ".xml".
- With "Select All" you select all importable variables and with "Import" you add them to the RealTimeDB of the Movicon project.
Bus: none
[PL700] CODESYS programming examples
-
- Moderatore
- Posts: 1702
- Joined: 29/10/2010, 10:09
- Contact:
[PL700] CODESYS programming examples
You do not have the required permissions to view the files attached to this post.