Pixsys Forum

I would like to know the procedure to load and unload the key ref: 2100.30.013 on the ATR144/244 device.
tank you

If you want to update configuration to the memory card:

- power off the controller
- insert memory card
- power on the controller
- go to configuration menu, change at least one parameter
- exit from configuration menu
--> the controller will save the configuration in the internal memory and also in the memory card

If you want to download the configuration from the memory card to the controller:

- power off the controller
- insert memory card
- power on the controller
- "Memory load" question appears
- select "YES" using arrows
- confirm with SET
--> the controller will load the configuration into its internal memory and starts to work.