Data Save TD320

[user17779]

Hi

I have a TD320 that appears to have the V table corrupted. I have a backup of the data needed but each time I connect to READ or WRITE the Block V data I get an error RECEIVE TIMEOUT.

All other communication to the PLC seems OK. I can monitor the program and see the currect data stored in the TD320 but I am currently unable to restore this data.

Any ideas what the problem could be?

Regards
Mark

[Pixsys tecnico 6]

Hi,
did you try to download a "empty" PLProg application and than download again your application?

Best Regards.

[user17779]

Hello

I have not tried this. It is not something I would automatically try. Why would this help?

[Pixsys tecnico 6]

Yes, this could help, but if it doesn't solve it could be a hardware problem. Please check the TD Special Marker 1 for the hardware issue.

Best regards.

[user17779]

I tried entering an empty program but this made no difference to the problem of writing data to V table.

I have entered the values manually through the data monitor window. One at a time. I have now added an option for the customer to backup/restore to EEPROM on a protected page on the TD, as the machine is sometimes not used for up to 18 months.

[Pixsys tecnico 6]

Hi,
maybe the TD320 battery needs to replace it. If you want to replace the battery, please contact our repair tecnical support by this follow link:
https://www.pixsys.net/qr.php?s=1206

Best Regards.