How to connect a 4 wire PT100 to an ATR121-AD
-
- Posts: 2
- Joined: 23/07/2011, 9:33
How to connect a 4 wire PT100 to an ATR121-AD
Have an "old" PT and while trying to connect it as a two wire (short brown and orange to 11 and short green and blue to 10 got the E-05. Checked the resistance and it fits the current temp (about 111 ohm). Suggestion please...
-
- Moderatore
- Posts: 1687
- Joined: 29/10/2010, 10:09
- Contact:
Re: How to connect a 4 wire PT100 to an ATR121-AD
Your connection is correct but you have to short-circuit also 10 to 12. Then remember to set [SEn] parameter to "PT".
To have a "3 wire connection" connect the blue wire to 12, short brown and orange to 11 and connect green to 10
To have a "3 wire connection" connect the blue wire to 12, short brown and orange to 11 and connect green to 10
-
- Posts: 2
- Joined: 23/07/2011, 9:33
Re: How to connect a 4 wire PT100 to an ATR121-AD
Since, I did have managed to work it out as a 3 wire. All now working as expected. Many thanks for confirming...