Pixsys Forum

Hello,

I have a probleme with a TD430.

My device restart when the gauge is as pictured or remains at this stage

Hi,
if you have the SD card "do not insert", plug it in the device and it power-on.

OS will start from the SD (boot logo is different)

Go to MyDevice/mRam and delete all the file inside the folder "LLExec" and all the other files. Practically, in the mRam there must be only a folder "LLExec", empty.

Then press START\Suspend.

Eject the SD, power-off and power-on the panel.

I try, but nothing change!

OK,
the last change (before send it to us) is trying to reinstalla the operating system.
Before we need to backup something:

-plug teh SD card in the device and it power-on.

-OS will start from the SD (boot logo is different)

-Go to MyDevice/mRam and delete all the file inside the folder "LLExec" and all the other files. Practically, in the mRam there must be only a folder "LLExec", empty.

- Go to NandFlash and copy to an USBdrive the folders "LLExecCE".

- Go to StorageCard and execute "Install.exe"

- After onstallation has finish, remove SD and power-off

- Power-on and restore the folder "LLExec" in NandFlash

- Reinstall TDControlPanel as explained here: http://forum.pixsys.net/viewtopic.php?f=25&t=1255

It's ok!

Thanks!

Good