Page 1 of 1
[TD430] Continuous restart with gauge
Posted: 01/07/2015, 14:20
by user963
Hello,
I have a probleme with a TD430.
My device restart when the gauge is as pictured or remains at this stage
Re: TD430 restart
Posted: 01/07/2015, 14:38
by Pixsys tecnico 1
Hi,
if you have the SD card "do not insert", plug it in the device and it power-on.
OS will start from the SD (boot logo is different)
Go to MyDevice/mRam and delete all the file inside the folder "LLExec" and all the other files. Practically, in the mRam there must be only a folder "LLExec", empty.
Then press START\Suspend.
Eject the SD, power-off and power-on the panel.
Re: TD430 restart
Posted: 01/07/2015, 15:36
by user963
I try, but nothing change!
Re: TD430 restart
Posted: 01/07/2015, 16:05
by Pixsys tecnico 1
OK,
the last change (before send it to us) is trying to reinstalla the operating system.
Before we need to backup something:
-plug teh SD card in the device and it power-on.
-OS will start from the SD (boot logo is different)
-Go to MyDevice/mRam and delete all the file inside the folder "LLExec" and all the other files. Practically, in the mRam there must be only a folder "LLExec", empty.
- Go to NandFlash and copy to an USBdrive the folders "LLExecCE".
- Go to StorageCard and execute "Install.exe"
- After onstallation has finish, remove SD and power-off
- Power-on and restore the folder "LLExec" in NandFlash
- Reinstall TDControlPanel as explained here:
http://forum.pixsys.net/viewtopic.php?f=25&t=1255
Re: TD430 restart
Posted: 01/07/2015, 16:21
by user963
It's ok!
Thanks!
Re: TD430 restart
Posted: 01/07/2015, 16:35
by Pixsys tecnico 1
Good