[ATR244] connection SENS. UMID.+ TEMP.EE23 T1,T2,T4,T6

[Pixsys tecnico 6]

This application allows you to view the humidity and temperature in 4-20ma or 0-10V using an ATR244-23xx-T controller.

Model controller: ATR244-23xx-T
Model Sensor used "T4"
RH Range: 0.. 100%
Temperature Range: -40.. 120°C

To set the "0-10V" in the sensor, insert the jumpers as shown in the photo.

0-10V.jpeg

To set the "4-20mA" in the sensor, insert the jumpers as shown in the photo.

4-20mA.jpeg

Perform the links as shown in photos.

Collegamenti.jpeg

Enter the configuration parameters via the tool or use the Mypixsys APP via "NFC".
Set in GROUP A [A.in.1],
Par.1[Sen.1]>"4-20ma" or "0-10V"
Par.2 [d.p.1]>"0.0"
Insert value the begin scale of the moisture sensor into Par.4 [L.l.i.1]>"0.0" and the end scale into Par.5 [u.L.i.1]>"100.0".

Set in GROUP B [A.in.2]
Par.18 [Sen.2]> "4-20ma" or "0-10V"
Par.19 [d.p.2]>"0.0"
Insert value the begin scale Par.21 [L.l.i.2]> "-40.0" and the end scale Par.22 [u.L.i.2]>"120.0".

To view the process of the second Input press the "FNC" button