I would like to know the procedure to load and unload the key ref: 2100.30.013 on the ATR144/244 device.
tank you
Procédure Key for ATR144 or 244 série
-
Pixsys tecnico 1
- Moderatore
- Posts: 1702
- Joined: 29/10/2010, 10:09
- Contact:
Re: Procédure Key for ATR144 or 244 série
If you want to update configuration to the memory card:
- power off the controller
- insert memory card
- power on the controller
- go to configuration menu, change at least one parameter
- exit from configuration menu
--> the controller will save the configuration in the internal memory and also in the memory card
If you want to download the configuration from the memory card to the controller:
- power off the controller
- insert memory card
- power on the controller
- "Memory load" question appears
- select "YES" using arrows
- confirm with SET
--> the controller will load the configuration into its internal memory and starts to work.
- power off the controller
- insert memory card
- power on the controller
- go to configuration menu, change at least one parameter
- exit from configuration menu
--> the controller will save the configuration in the internal memory and also in the memory card
If you want to download the configuration from the memory card to the controller:
- power off the controller
- insert memory card
- power on the controller
- "Memory load" question appears
- select "YES" using arrows
- confirm with SET
--> the controller will load the configuration into its internal memory and starts to work.