Iris _

Pixsys Forum

everybody's effort for the same goal

GUIDE TO TRANSFER SW TO PLC OR HMI WITH PLPROGR - TDDESIGNER

Post Reply
Pixsys tecnico 1
Moderatore
Posts: 1649
Joined: 29/10/2010, 10:09
Contact:

GUIDE TO TRANSFER SW TO PLC OR HMI WITH PLPROGR - TDDESIGNER

Post by Pixsys tecnico 1 »

GUIDE TO TRANSFER SOFTWARE TO PLC OR HMI TD240/TD320 WITH PLPROG – TdDESIGNER SUITE:

1- First download and install last version of the suite from https://www.pixsys.net/hubfs/Software/U ... og4.75.zip

2- Open PlProg and open the software you want to download to the PLC/HMI. In case of using an HMI, open TdDesigner also and open the software you want to download to the HMI

3- In TdDesigner, compile using the button you see in the picture below
Immagine.jpg
NB: Do not close TdDesigner Application until transferring progress is completed.

4- In PlProg, after selecting the right COM port from the menu “Communication Port| Com”, compile using the button you see in the picture below
Immagine.jpg
Finally transfer using the button you see in the picture below
tddesign.jpg
You do not have the required permissions to view the files attached to this post.
Post Reply