Iris _

Pixsys Forum

everybody's effort for the same goal

[ATR111] Setting controller and hysteresis

Post Reply
Pixsys tecnico 1
Posts: 1678
Joined: 29/10/2010, 10:09

Re: Setting ATR111 temperature controller

Post by Pixsys tecnico 1 »

What type of thermocouple do you use?
You have to set:
[SEn]: type of thermocouple
[HY.c]: "0.5"
To modify the set-point value you have to go out of the parameters and use the arrows.
Post Reply