Ciao!
We have more than 32 Pixsys in manufactory, we want to set them in one network on pc!
Can we use IModView? Maybe there is some recommendation or solution, because ModBus supports just 32 devices! Maybe some repeater/spliter?
Thank You for answers!
[IMod View] Single network with more than 32 controllers
-
- Posts: 36
- Joined: 09/02/2011, 14:33
- Location: Latvia
- Contact:
-
- Moderatore
- Posts: 1665
- Joined: 29/10/2010, 10:09
- Contact:
Re: IMod View
Hi,
you can use ImodView to connect in one network more than 32 Pixsys instruments using another net200 as a repeater.
you can use ImodView to connect in one network more than 32 Pixsys instruments using another net200 as a repeater.
-
- Posts: 36
- Joined: 09/02/2011, 14:33
- Location: Latvia
- Contact:
Re: IMod View
Ciao!
So, i have 50 pcs of Pixsys controllers! I need to use 2 pcs of NET 200, one as repeater and second one as converter?
( 31 device + 1 Net 200 ( where is connected the other 19 devices ) ) => Net200 => iModView
Am i right?
So, i have 50 pcs of Pixsys controllers! I need to use 2 pcs of NET 200, one as repeater and second one as converter?
( 31 device + 1 Net 200 ( where is connected the other 19 devices ) ) => Net200 => iModView
Am i right?
-
- Moderatore
- Posts: 1665
- Joined: 29/10/2010, 10:09
- Contact:
Re: IMod View
Yes, perfect