Pixsys Forum
https://forum.pixsys.net/

[PDR100][PDR200]Project Example
https://forum.pixsys.net/viewtopic.php?f=31&t=2234
Page 1 of 1

Author:  Pixsys tecnico 6 [ 08/05/2019, 14:19 ]
Post subject:  [PDR100][PDR200]Project Example

This section shows some examples of design and parameterization of PDR Series inverters
Before downloading the examples, we recommend that you log in to http://www.pixsys.net and read the PDR user guide, accessible at the following link:
PDR100: https://www.pixsys.net/download_file.ph ... _REV.A.pdf
PDR200: https://www.pixsys.net/download_file.ph ... _REV.A.pdf

Example1: PDR100/PDR200 controlled by HMI TD810-AD
This application allows you to set and display the motor rpm frequency, the motor start/stop and direction of rotation, its acceleration and deceleration. The application development on HMI TD810-AD is implemented with Logiclab and Movicon11 software.
Bus: MODBUS RTU
Attachment:
Example_1.jpg

Example PDR100 User Guide link:
Attachment:
Es01_user_guide_PDR100.pdf

Example PDR200 User Guide link:
Attachment:
Es01_user_guide_PDR200.pdf

Software Application link:
Attachment:
TD810.zip


Example2: PDR100 controlled by ATR244-12ABC
This application allows to carry out a proportional band motor speed regulation according to the setpoint set and probe process reading. The output used is 0-10V of the ATR244-12ABC regulator. The application also allows to switch to a manual mode for the regulation of the 0-10V, omitting the parameters of the inserted proportional. The motor start/stop is defined by a digital input
Bus: MODBUS RTU
Attachment:
Esempio2.jpg

The parameter files of the ATR244-12ABC instrument are available at the following link:
Attachment:
ATR244-12ABC.zip

The guide to the implementation of the project is available at the following link:
Attachment:
ES02_User_guide_PDR100.pdf

Page 1 of 1 All times are UTC + 1 hour [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/