This section shows some examples of design and parameterization of PDR Series invertersBefore downloading the examples, we recommend that you log in to
http://www.pixsys.net and read the PDR user guide, accessible at the following link:
PDR100:
https://www.pixsys.net/download_file.ph ... _REV.A.pdfPDR200:
https://www.pixsys.net/download_file.ph ... _REV.A.pdfExample1:
PDR100/PDR200 controlled by HMI TD810-ADThis application allows you to set and display the motor rpm frequency, the motor start/stop and direction of rotation, its acceleration and deceleration. The application development on HMI TD810-AD is implemented with Logiclab and Movicon11 software.Bus:
MODBUS RTUAttachment:
Example_1.jpg
Example PDR100 User Guide link:
Attachment:
Es01_user_guide_PDR100.pdf
Example PDR200 User Guide link:
Attachment:
Es01_user_guide_PDR200.pdf
Software Application link:
Attachment:
TD810.zip
Example2:
PDR100 controlled by ATR244-12ABCThis application allows to carry out a proportional band motor speed regulation according to the setpoint set and probe process reading. The output used is 0-10V of the ATR244-12ABC regulator. The application also allows to switch to a manual mode for the regulation of the 0-10V, omitting the parameters of the inserted proportional. The motor start/stop is defined by a digital inputBus:
MODBUS RTUAttachment:
Esempio2.jpg
The parameter files of the ATR244-12ABC instrument are available at the following link:
Attachment:
ATR244-12ABC.zip
The guide to the implementation of the project is available at the following link:
Attachment:
ES02_User_guide_PDR100.pdf