Last visit was: It is currently 28/09/2022, 17:57


All times are UTC + 1 hour [ DST ]




Post new topic This topic is locked, you cannot edit posts or make further replies.  [ 1 post ] 
Author Message
 Post subject: [PDR100][PDR200]Project Example
PostPosted: 08/05/2019, 14:19 
Moderatore

Joined: 12/09/2016, 14:49
Posts: 1070
This section shows some examples of design and parameterization of PDR Series inverters
Before downloading the examples, we recommend that you log in to http://www.pixsys.net and read the PDR user guide, accessible at the following link:
PDR100: https://www.pixsys.net/download_file.ph ... _REV.B.pdf
PDR200: https://www.pixsys.net/download_file.ph ... _REV.B.pdf

Example1: PDR100/PDR200 controlled by HMI TD810-AD
This application allows you to set and display the motor rpm frequency, the motor start/stop and direction of rotation, its acceleration and deceleration. The application development on HMI TD810-AD is implemented with Logiclab and Movicon11 software.
Bus: MODBUS RTU
Attachment:
Example_1.jpg

Example PDR100 User Guide link:
Attachment:
Es01_user_guide_PDR100.pdf

Example PDR200 User Guide link:
Attachment:
Es01_user_guide_PDR200.pdf

Software Application link:
Attachment:
TD810.zip


Example2: PDR100 controlled by ATR244-12ABC
This application allows to carry out a proportional band motor speed regulation according to the setpoint set and probe process reading. The output used is 0-10V of the ATR244-12ABC regulator. The application also allows to switch to a manual mode for the regulation of the 0-10V, omitting the parameters of the inserted proportional. The motor start/stop is defined by a digital input
Bus: MODBUS RTU
Attachment:
Esempio2.jpg

The parameter files of the ATR244-12ABC instrument are available at the following link:
Attachment:
ATR244-12ABC.zip

The guide to the implementation of the project is available at the following link:
Attachment:
ES02_User_guide_PDR100.pdf


Example3: PDR100/PDR200 controlled by PLC Codesys 3.5 with supervisor TD710-AD
This application allows you to set and display the motor rpm frequency, the motor start/stop and direction of rotation, its acceleration and deceleration.
The development of the graphics is implemented on the TD710-AD with the software Movicon11.6
, the development of the logic with the IDE Codesys 3.5.
Bus: MODBUS RTU
Example PDR100 User Guide link:
Attachment:
Es03_user_guide_PDR100.pdf

Example PDR200 User Guide link:
Attachment:
Es03_user_guide_PDR200.pdf

Software Application link:
Attachment:
Example_03.zip


You do not have the required permissions to view the files attached to this post.


Top
Offline Profile  
 
Display posts from previous:  Sort by  
Post new topic This topic is locked, you cannot edit posts or make further replies.  [ 1 post ] 

All times are UTC + 1 hour [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Theme created StylerBB.net & kodeki