Iris _

Pixsys Forum

everybody's effort for the same goal

ATR621 Program issue after waiting time

Post Reply
fosaprat
Posts: 1
Joined: 18/03/2021, 16:22

ATR621 Program issue after waiting time

Post by fosaprat »

Hello.
I've been using ATR621 for several years now without any issue.
On the last process I made, the program didn't start after the initial waiting time. I've realized it only starts (C1 led on) after I temper SPu and push up button a bit.
That happens on both cY.01 and cY.02 but not on the last program I made, cY.03.

Could you tell me what's the issue and what is causing this?

Thanks a lot for the reply.
Pixsys tecnico 1
Moderatore
Posts: 1649
Joined: 29/10/2010, 10:09
Contact:

Re: ATR621 Program issue after waiting time

Post by Pixsys tecnico 1 »

Hi,
what is the firmware versione fo your ATR621? It's the number that you can see during the boot-up time of the controller.
Post Reply