Iris _

Pixsys Forum

everybody's effort for the same goal

ATR 313 10 AD

Pixsys tecnico 1
Moderatore
Posts: 1649
Joined: 29/10/2010, 10:09
Contact:

Re: ATR 313 10 AD

Post by Pixsys tecnico 1 »

If you use GAS kiln, you can go to "Special Function" window and set GAS MODE to "Enable" (during cooling burners will be OFF) or TO "GID" (during cooling burners will go on-off according to the PV/SPV1).
Post Reply