Iris _

Pixsys Forum

everybody's effort for the same goal

[ATR620] "full power step" and "endless time step"

Post Reply
user10647
Posts: 1
Joined: 25/02/2015, 15:32

[ATR620] "full power step" and "endless time step"

Post by user10647 »

Hi,

Is there anyway to program a segment of the ATR 620 to use the full power of a kiln to ramp up or down from a temperature to another one without indicating a specific time?

e.g. on some controllers, you can enter Full or 999 instead of a specific duration to have full power and reach the temperature as fast as possible.

Best regards
Pixsys tecnico 1
Moderatore
Posts: 1649
Joined: 29/10/2010, 10:09
Contact:

Re: ATR620 Programming

Post by Pixsys tecnico 1 »

Hi,
set the step time to 00.01
Pixsys tecnico 1
Moderatore
Posts: 1649
Joined: 29/10/2010, 10:09
Contact:

Re: ATR620 Programming

Post by Pixsys tecnico 1 »

"endless time" means the time of the step will be infinite.
Post Reply