Iris _

Pixsys Forum

everybody's effort for the same goal

2000.35.015 current conversion to voltage

Post Reply
Eugenijus123
Posts: 1
Joined: 29/10/2020, 10:13

2000.35.015 current conversion to voltage

Post by Eugenijus123 »

Dear consultants.
Is it possible to use 500 ohm resistor to convert output current to voltage - our controller accepts only voltage signals.
Using 500 ohm resistor i can easy convert 4 ... 20 mA to 2 ...10V acceptable for controller.
Sometimes in such situation conversion resistor is limited to 250 Ohm(not more than).
Pixsys tecnico 1
Moderatore
Posts: 1649
Joined: 29/10/2010, 10:09
Contact:

Re: 2000.35.015 current conversion to voltage

Post by Pixsys tecnico 1 »

Hi,
with our 2000.35.015 you can put a 500 Ohm resistor to convert 4..20mA to 2..10V
Post Reply