2000.35.015 current conversion to voltage
Posted: 29/10/2020, 10:23
Dear consultants.
Is it possible to use 500 ohm resistor to convert output current to voltage - our controller accepts only voltage signals.
Using 500 ohm resistor i can easy convert 4 ... 20 mA to 2 ...10V acceptable for controller.
Sometimes in such situation conversion resistor is limited to 250 Ohm(not more than).
Is it possible to use 500 ohm resistor to convert output current to voltage - our controller accepts only voltage signals.
Using 500 ohm resistor i can easy convert 4 ... 20 mA to 2 ...10V acceptable for controller.
Sometimes in such situation conversion resistor is limited to 250 Ohm(not more than).