Iris _

Pixsys Forum

everybody's effort for the same goal

Pressure sensor E-05

Post Reply
user16601
Posts: 1
Joined: 09/01/2018, 8:51

Pressure sensor E-05

Post by user16601 »

Hello,

I have one of ATR243-20ABC. I want to connect it with 4-20mA pressure sensor.
I have set:
C.out - c.o1
SEn. - 4.20
d.P - 0
tunE - Auto
oP.No - cont

Still i get E-05 error. Maybe someone has an example for connecting these sensors? Also I'm interested which jumpers I should use.


BR,
Povilas
Pixsys tecnico 6
Moderatore
Posts: 1184
Joined: 12/09/2016, 14:49

Re: Pressure sensor E-05

Post by Pixsys tecnico 6 »

Hi,
In the 5.1.c paragraph of the ATR243 user guide there are examples how to connect the linear input sensor and in the 5.1.j paragraph there are the correct setting of the jumper JP7-JP5-JP9 to enable the 4-20mA input.
You can download the ATR user guide by link below. (login required)

http://www.pixsys.net/en/products/pid-c ... ers/atr243

Best Regards.
HenryChind
Posts: 6
Joined: 03/02/2019, 19:08
Location: Sri Lanka
Contact:

Pressure sensor E 05

Post by HenryChind »

CEL is on. Code is for the oil pressure sensor reads 65psi with the engine off
I bought the sensor but cannot find it on the engine to save my life. Help
Pixsys tecnico 6
Moderatore
Posts: 1184
Joined: 12/09/2016, 14:49

Re: Pressure sensor E-05

Post by Pixsys tecnico 6 »

Hi,
what ATR243-20ABC PIN are you using for your pressure sensor? How much voltage does your sensor require to function properly?

Best Regards.
You do not have the required permissions to view the files attached to this post.
Post Reply