Iris _

Pixsys Forum

everybody's effort for the same goal

Read analog inputs with ETD1644-AD

Post Reply
JeffSayto123
Posts: 4
Joined: 04/03/2021, 8:56

Read analog inputs with ETD1644-AD

Post by JeffSayto123 »

Help me please I'm new to Pixsys programming. :cry:
What happens is that I have to create a program, which I have 3 analog inputs: 2 inputs are for 4 / 20mA and 1 is for 0 / 10V. :shock:
Please any help would be very appreciated. :D
Pixsys tecnico 1
Moderatore
Posts: 1649
Joined: 29/10/2010, 10:09
Contact:

Re: Read analog inputs with ETD1644-AD

Post by Pixsys tecnico 1 »

hi, please follow example 6 or 7 from here:
https://forum.pixsys.net/viewtopic.php?f=25&t=1768

If you use linear input (4-20mA) in the first step (in "parametrization" tab) you have also to insert "AI lower linear input" and "AI upper linear input" to configurare value to have with 4ma signal (lower) and 20mA signal (upper).
In this way, using "Analogue input value" you will read the value between lower and upper limits (not in mA).
Post Reply