Iris _

Pixsys Forum

everybody's effort for the same goal

The display refresh time

Post Reply
user14306
Posts: 20
Joined: 01/12/2016, 13:51

The display refresh time

Post by user14306 »

Hello,
I want to display the temperature and communicate with several devices (DRR450) at the same time on a TD810.
The communication with the device works but the display on the HMI takes too long to update.
The display refresh time is too long (about 45 seconds).
Do you have a solution? Thank you.
Pixsys tecnico 6
Moderatore
Posts: 1184
Joined: 12/09/2016, 14:49

Re: The display refresh time

Post by Pixsys tecnico 6 »

Hi,
maybe it is a Movicon drivers issue.

Please follow the procedure:
1. Follow the example number 16 and restore your HMI TD810 (Example number16) at follow link:
https://forum.pixsys.net/viewtopic.php?f=25&t=2231

2. Remove your Movicon Software from your PC and install the Movicon release that you can downloable at follow link:
https://cloud.pixsys.net/index.php?fm_dir=Movicon

3.By the same link download the Movicon driver executable file for your windows system. (Example: MOVICON 11.6 Update-Aggiorna Driver x64.exe)

4. Open the path Your_Project_Folder\RESOURCES\Your_Project_Name\ and delete the file AxelDriver.drvsettings

5. Open your Movicon Project and configure again your Project Driver a import again the PLC variables.(User guide video: https://youtu.be/Qvmox4YgejY)

6. Open the Movicon file transfer end download again your project files to TD810. (Before starting the project download it would be better to delete your project folder in TD810.)

7. Run the Project.

Best Regards.
Post Reply