Iris _

Pixsys Forum

everybody's effort for the same goal

Transfer Software from TD320 to pc

Post Reply
user17089
Posts: 1
Joined: 29/03/2018, 9:55

Transfer Software from TD320 to pc

Post by user17089 »

Hi there,

Would you be so kind as to enlighten me on this particular matter?
How should I proceed in copying the software stored in the TD320 and the PLC300 to a pc?
I need to change some parameters without having the rewrite the whole code block.

I'm using a serial USB signal convertor RS232 on com2 for communication with the module.

Thanks in advance!
Pixsys tecnico 6
Moderatore
Posts: 1184
Joined: 12/09/2016, 14:49

Re: Transfer Software from TD320 to pc

Post by Pixsys tecnico 6 »

Hi,
the PLC code was encrypted. It is not possible to copy the PLC softwre into the PC. You need the source code so you can donwload to all PLC.

Best regards.
Post Reply