Page 1 of 1

entrada analógica 4-20mA en PL260

Posted: 10/10/2017, 14:04
by user16097
Hello, I would like to know how to configure the analog inputs of 0-20mA in the PL260

Re: entrada analógica 4-20mA en PL260

Posted: 10/10/2017, 14:58
by Pixsys tecnico 6
Hi,
follow this dip-switch settings example to enable the mA AI1 input.
DIP1=ON
DIP2=OFF
DIP3=OFF
DIP4=OFF

Special marker value:
Set the SM40 = 5 (enable 0-20mA signal) and you can define the signal range using the SM46 and SM52.

Best Regards.