Hello
It is necessary to replace the faulty module (with faulty output) of the PL250-10AD air / gas flow control with a new one.
How can I rewrite (clone) a program from an old module to a new one?
We have KIT ATR313 (DataLogger and Cables), the program PlProg 4.75.
Please help.
Regards
PL250 clone
-
Pixsys tecnico 6
- Moderatore
- Posts: 1188
- Joined: 12/09/2016, 14:49
Re: PL250 clone
Hi,
if you want to replace the faulty module PL250-10AD you can to replace it with a specific PL250-10AD programmed for working with ATR313. you can to specified this when you are ordering it.
Best Regards
if you want to replace the faulty module PL250-10AD you can to replace it with a specific PL250-10AD programmed for working with ATR313. you can to specified this when you are ordering it.
Best Regards
-
user15124
- Posts: 4
- Joined: 01/05/2017, 9:04
Re: PL250 clone
Unfortunately the PL250-10AD module has already been received.
I did not expect that there could be problems with copying.
In the description of the program PlProg 4.75 there is an item
"6.1.3.8 PLC maintenance
For instance when you want to clone a device. "
So I wanted to clarify whether there is a program or utility for cloning the device.
Regards
I did not expect that there could be problems with copying.
In the description of the program PlProg 4.75 there is an item
"6.1.3.8 PLC maintenance
For instance when you want to clone a device. "
So I wanted to clarify whether there is a program or utility for cloning the device.
Regards