GUIDE TO TRANSFER SW TO PLC OR HMI WITH PLPROGR - TDDESIGNER
Posted: 21/01/2016, 11:23
GUIDE TO TRANSFER SOFTWARE TO PLC OR HMI TD240/TD320 WITH PLPROG – TdDESIGNER SUITE:
1- First download and install last version of the suite from https://www.pixsys.net/hubfs/Software/U ... og4.75.zip
2- Open PlProg and open the software you want to download to the PLC/HMI. In case of using an HMI, open TdDesigner also and open the software you want to download to the HMI
3- In TdDesigner, compile using the button you see in the picture below NB: Do not close TdDesigner Application until transferring progress is completed.
4- In PlProg, after selecting the right COM port from the menu “Communication Port| Com”, compile using the button you see in the picture below Finally transfer using the button you see in the picture below
1- First download and install last version of the suite from https://www.pixsys.net/hubfs/Software/U ... og4.75.zip
2- Open PlProg and open the software you want to download to the PLC/HMI. In case of using an HMI, open TdDesigner also and open the software you want to download to the HMI
3- In TdDesigner, compile using the button you see in the picture below NB: Do not close TdDesigner Application until transferring progress is completed.
4- In PlProg, after selecting the right COM port from the menu “Communication Port| Com”, compile using the button you see in the picture below Finally transfer using the button you see in the picture below