Iris _

Pixsys Forum

everybody's effort for the same goal

PID REGULATION VALVE

Post Reply
user16787
Posts: 1
Joined: 08/02/2018, 13:09

PID REGULATION VALVE

Post by user16787 »

Hello,
I have to regulate the opening and closing of a valve with the analog output 4-20 mA. I have the ATR243 driver. How do I have to act to set the PID parameters ???? What parameters do I have to change ??? I do not understand the datasheet instructions. :cry:
Pixsys tecnico 6
Moderatore
Posts: 1184
Joined: 12/09/2016, 14:49

Re: PID REGULATION VALVE

Post by Pixsys tecnico 6 »

Hi,
the PID parameters depend of the system you are using. The ATR243 PID parameters are number 18-19-20-21. You can try to set the parameter 57.[tunE] = "Auto". The ATR243 setting the PID automatically.

Best Regards.
HenryChind
Posts: 6
Joined: 03/02/2019, 19:08
Location: Sri Lanka
Contact:

PID REGULATION VALVE

Post by HenryChind »

I think the only thing you can do is to find a servo valve with a CAN interface.

KR,
FStelzer
Pixsys tecnico 6
Moderatore
Posts: 1184
Joined: 12/09/2016, 14:49

Re: PID REGULATION VALVE

Post by Pixsys tecnico 6 »

The ATR243 does not manage the CAN protocol and usually the valves do not use the CAN. The problem is only the incorrect configuration of the device and most of the time it is sufficient to activate an Autotuning to solve the problem.

Best regards.
Post Reply