Iris _

Pixsys Forum

everybody's effort for the same goal

Controller ATR621-14ABC

Post Reply
user14957
Posts: 3
Joined: 28/03/2017, 13:40

Controller ATR621-14ABC

Post by user14957 »

good afternoon! At our factory the controller ATR620 was out of order, we had to replace ATR621 with it. Please tell me how to transfer the settings of the old controller to a new one
Pixsys tecnico 6
Moderatore
Posts: 1184
Joined: 12/09/2016, 14:49

Re: Controller ATR621-14ABC

Post by Pixsys tecnico 6 »

Hi,
if you want to replace the ATR620 with the ATR621 you must set manually the parameters of the ATR621. There is not a automatic method to copy the old parameters in to a new ATR621, but the old parameters are the same of the new ATR621 parameters.

Best Regards
user14957
Posts: 3
Joined: 28/03/2017, 13:40

Re: Controller ATR621-14ABC

Post by user14957 »

Thank you for helping us! We have so far managed to adjust the time and temperature and the inclusion of one group of heating tones until you get to activate the second and cooling mode
user14957
Posts: 3
Joined: 28/03/2017, 13:40

Re: Controller ATR621-14ABC

Post by user14957 »

File with old settings ATR 620 is very different from ATR 621
You do not have the required permissions to view the files attached to this post.
Pixsys tecnico 1
Moderatore
Posts: 1649
Joined: 29/10/2010, 10:09
Contact:

Re: Controller ATR621-14ABC

Post by Pixsys tecnico 1 »

Hi,
see the table attached (change only highlighted parameters, leave others as default).
You do not have the required permissions to view the files attached to this post.
Post Reply