Iris _

Pixsys Forum

everybody's effort for the same goal

[ATR243] Gradient and soft start in cooling

Post Reply
user7736
Posts: 19
Joined: 25/02/2014, 13:37

[ATR243] Gradient and soft start in cooling

Post by user7736 »

Hello,

1)
I have ATR243-31ABC and I cannot find an option that is mentioned in page 20. ->''SScY'' (soft start cycle)
In parameter 59 "Operating mode" there is no such option.

2)
I attached necessary task I have to make, does soft start in cooling mode would work?

Thanks!
You do not have the required permissions to view the files attached to this post.
Pixsys tecnico 1
Moderatore
Posts: 1649
Joined: 29/10/2010, 10:09
Contact:

Re: Gradient and soft start

Post by Pixsys tecnico 1 »

What's the firmware version of the regulator? You can see it during boot of hte regulator. It is something like 1.22
user7736
Posts: 19
Joined: 25/02/2014, 13:37

Re: Gradient and soft start

Post by user7736 »

Yes, it is 1.22

I now set parameters
1) Action type = cooling
2) gradient = 60
3) Hysteresis = 0.5 C

It seem like everything is working, not sure about precision yet
Pixsys tecnico 1
Moderatore
Posts: 1649
Joined: 29/10/2010, 10:09
Contact:

Re: Gradient and soft start

Post by Pixsys tecnico 1 »

Hi,
''SScY'' mode is only avaiable from firmware versione 1.27.
Post Reply