Iris _

Pixsys Forum

everybody's effort for the same goal

New ATR 902 not working

Post Reply
user14452
Posts: 8
Joined: 01/01/2017, 16:56

New ATR 902 not working

Post by user14452 »

Hello again,

I come from here:
http://forum.pixsys.net/viewtopic.php?f=27&t=1609

A broken ATR-901,
So I bought a brand new ATR-902, was supposed to be the substitute for the old ATR-901 malfunctioning.

And the new one is not working at all. I thought it should be as easy as plug-in it, but no, it does not work, it just never turn on the heating elements, but the controler is saying that they are on.

Relays are properly working, I've done again the wiring conexion to be sure that wasn't any contact problem, so far my kiln is been working with the ATR 901 but not with this new controller, and it's working with the new wiring/pin aswell.

Can you offer any type of explanation to that?
user14452
Posts: 8
Joined: 01/01/2017, 16:56

Re: New ATR 902 not working

Post by user14452 »

Hello, I would like to receive an answer ASAP.
Pixsys tecnico 6
Moderatore
Posts: 1184
Joined: 12/09/2016, 14:49

Re: New ATR 902 not working

Post by Pixsys tecnico 6 »

Hello,
the ATR901 and ATR902 are Pin to Pin compatible. I don't understand why yoour oven don't work with ATR902. Can you send me your old ATR901 parameters list?

Best Regards
user14452
Posts: 8
Joined: 01/01/2017, 16:56

Re: New ATR 902 not working

Post by user14452 »

I could, but I don't think there is any configurable parameter on the ATR 901 that have nothing to do with that, isn't it?
user14452
Posts: 8
Joined: 01/01/2017, 16:56

Re: New ATR 902 not working

Post by user14452 »

P1 2
1300
11
0
P5 0
0.0
0
0
0.0
P10 3
0
0
25
1
P15 1.0
0
1
user14452
Posts: 8
Joined: 01/01/2017, 16:56

Re: New ATR 902 not working

Post by user14452 »

Solved, changed Alarm options on ATR 902.

Sorry, I was blaming you.
Post Reply