[TD430] Continuous restart with gauge

user963 · Post by **user963** » 01/07/2015, 14:20

Hello,

I have a probleme with a TD430.

My device restart when the gauge is as pictured or remains at this stage

Post by **Pixsys tecnico 1** » 01/07/2015, 14:38

Hi,
if you have the SD card "do not insert", plug it in the device and it power-on.

OS will start from the SD (boot logo is different)

Go to MyDevice/mRam and delete all the file inside the folder "LLExec" and all the other files. Practically, in the mRam there must be only a folder "LLExec", empty.

Then press START\Suspend.

Eject the SD, power-off and power-on the panel.

user963 · Post by **user963** » 01/07/2015, 15:36

I try, but nothing change!

Post by **Pixsys tecnico 1** » 01/07/2015, 16:05

OK,
the last change (before send it to us) is trying to reinstalla the operating system.
Before we need to backup something:

-plug teh SD card in the device and it power-on.

-OS will start from the SD (boot logo is different)

-Go to MyDevice/mRam and delete all the file inside the folder "LLExec" and all the other files. Practically, in the mRam there must be only a folder "LLExec", empty.

- Go to NandFlash and copy to an USBdrive the folders "LLExecCE".

- Go to StorageCard and execute "Install.exe"

- After onstallation has finish, remove SD and power-off

- Power-on and restore the folder "LLExec" in NandFlash

- Reinstall TDControlPanel as explained here: http://forum.pixsys.net/viewtopic.php?f=25&t=1255

user963 · Post by **user963** » 01/07/2015, 16:21

It's ok!

Thanks!

Post by **Pixsys tecnico 1** » 01/07/2015, 16:35

Good

Pixsys Forum